Posts for category: Dental Procedures
If we could go back in time, we all probably have a few things we wish we could change. Recently, Dr. Travis Stork, emergency room physician and host of the syndicated TV show The Doctors, shared one of his do-over dreams with Dear Doctor magazine: “If I [could have] gone back and told myself as a teenager what to do, I would have worn a mouthguard, not only to protect my teeth but also to help potentially reduce risk of concussion.”
What prompted this wish? The fact that as a teenage basketball player, Stork received an elbow to the mouth that caused his two front teeth to be knocked out of place. The teeth were put back in position, but they soon became darker and began to hurt. Eventually, both were successfully restored with dental crowns. Still, it was a painful (and costly) injury — and one that could have been avoided.
You might not realize it, but when it comes to dental injuries, basketball ranks among the riskier sports. Yet it’s far from the only one. In fact, according to the American Dental Association (ADA), there are some two dozen others — including baseball, hockey, surfing and bicycling — that carry a heightened risk of dental injury. Whenever you’re playing those sports, the ADA recommends you wear a high-quality mouth guard.
Mouthguards have come a long way since they were introduced as protective equipment for boxers in the early 1900’s. Today, three different types are widely available: stock “off-the-shelf” types that come in just a few sizes; mouth-formed “boil-and-bite” types that you adapt to the general contours of your mouth; and custom-made high-quality mouthguards that are made just for you at the dental office.
Of all three types, the dentist-made mouthguards are consistently found to be the most comfortable and best-fitting, and the ones that offer your teeth the greatest protection. What’s more, recent studies suggest that custom-fabricated mouthguards can provide an additional defense against concussion — in fact, they are twice as effective as the other types. That’s why you’ll see more and more professional athletes (and plenty of amateurs as well) sporting custom-made mouthguards at games and practices.
“I would have saved myself a lot of dental heartache if I had worn a mouthguard,” noted Dr. Stork. So take his advice: Wear a mouthguard whenever you play sports — unless you’d like to meet him (or one of his medical colleagues) in a professional capacity…
Dental implants are best known as restorations for single missing teeth. But there’s more to them than that—they can also be used to support and secure removable dentures or fixed bridges.
That’s because a dental implant is actually a root replacement. A threaded titanium post is inserted directly into the jawbone where, over time, bone cells grow and adhere to it. This accumulated bone growth gives the implant its signature durability and contributes to its long-term success rate (95%-plus after ten years). It can support a single attached crown, or serve as an attachment point for a dental bridge or a connector for a removable denture.
The method and design of implants differentiates it from other restoration options. And there’s one other difference—implants require a minor surgical procedure to insert them into the jawbone.
While this might give you pause, implant surgery is no more complicated than a surgical tooth extraction. In most cases we can perform the procedure using local anesthesia (you’ll be awake the entire time) coupled with sedatives (if you have bouts of anxiety) to help you relax.
We first access the bone through small incisions in the gums and then create a small channel or hole in it. A surgical guide that fits over the teeth may be used to help pinpoint the exact location for the implant.
We then use a drilling sequence to progressively increase the size of the channel until it matches the implant size and shape. We’re then ready to insert the implant, which we remove at this time from its sterile packaging. We may then take a few x-rays to ensure the implant is in the right position, followed by closing the gums with sutures.
There may be a little discomfort for that day, but most patients can manage it with over-the-counter pain relievers like aspirin or ibuprofen. It’s what goes on over the next few weeks that’s of prime importance as the bone grows and adheres to the implant. Once they’re fully integrated, we’re ready to move to the next step of affixing your crown, bridge or denture to gain what you’ve waited so long for—your new implant-supported smile.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implant Surgery: What to Expect Before, During and After.”
Despite everyone’s best efforts, one of your child’s primary (“baby”) teeth has become decayed to the point it might be lost prematurely. Saving it would require extensive treatment like capping it with a crown or performing a pulpotomy, similar to a root canal treatment.
You may be thinking: since it’s going to come out eventually, why go to the expense of trying to preserve it longer? Actually, there are good reasons to save a baby tooth depending on your child’s age — for now and for the future. Here are 4 of them.
They’re important for nutrition. Baby teeth are quite similar to permanent teeth — not only do they look like them, they perform like them too, enabling a growing child to chew and digest food needed to boost their development. Even the loss of one tooth for an extended period makes effective chewing harder.
They’re important for speech development. With their first words, children develop speech patterns rather quickly. Their baby teeth play an important role in this: just like permanent teeth, they provide the tongue with points of contact for making a variety of sounds. A missing tooth for a prolonged period could interfere with making certain sounds and could have a stunting effect on their speech development.
They’re important for permanent teeth eruption. Baby teeth also serve as placeholders for their successors, the permanent teeth that are in development just under the gums. A baby tooth normally remains until the permanent tooth is ready to erupt within the path set by the primary. If they’re lost prematurely, the permanent tooth may not erupt as it should; and adjacent permanent teeth can drift toward the empty space and out of alignment.
They’re part of their smile. Baby teeth help children fit in socially with adults and other children — they help them look normal. A missing tooth stands out when they smile — and not in a good way. This could impact the way they interact socially with others, extending even into adulthood.
If you would like more information on dental care for your child, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Importance of Baby Teeth.”
Dental implants are among the most popular tooth replacements with their high success rate, durability and life-like beauty. But obtaining them is a process that requires commitment, planning, and coordination — it takes a team.
Your general dentist is often the first team member you’ll encounter: because they’re most familiar with your mouth’s condition the implant discussion naturally begins here. They can help you determine if you’re a good candidate for implants, such as if you have sufficient bone mass at the intended site or if you have dental disease that must be treated first. They’ll also continue monitoring your general dental health throughout the process.
Your general dentist may also have the special training for surgically placing implants. If not, he or she may refer you to your next team member: an oral surgeon or periodontist skilled in implantation procedures. This step first requires careful planning, including developing a surgical guide for precise placement of the implant. These specialists may also contribute to other aspects of the implant process such as tooth extraction or bone grafting.
A few weeks after surgery bone will have grown and adhered to the implant to form a solid bond. It’s time for you to go back to your dentist who will work in conjunction with another member of your team, a dental lab technician. Together, your dentist and laboratory technician will guide the development, manufacture and placement of the implant’s life-like porcelain crown. The technician will take their specifications from the surgeon and your general dentist and, with his or her skill and artistry, form a crown that will blend well in color and shape with the rest of your teeth.
We also can’t forget another important team member: you. Without your input, especially in the early planning stages, your expectations for a more attractive smile might not be met. The rest of your implant team depends on you communicating your desires and wishes to balance with the technical requirements they must achieve.
The process for dental implants can take months. But with the coordinated efforts of your implant team you’ll be able to enjoy results — renewed function and a more attractive smile — that could last for decades.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants.”
We’ve come a long way in our ability to restore missing teeth. Today’s top choice is dental implants, prized not only for their close resemblance to real teeth but also their durability.
The rise of implants, though, hasn’t put older restorative methods out to pasture—many continue to offer patients a viable and affordable choice for tooth replacement. One example is the removable partial denture (RPD).
Once quite common, RPDs’ popularity has only slightly diminished with the advent of implants. They’re a fair option in terms of dental function and appearance, and much less expensive than implants or fixed bridges.
Similar to a full denture—a removable appliance that replaces all the teeth on a dental arch—a RPD can replace multiple missing teeth in a variety of configurations. A traditional RPD is usually constructed of vitallium, a lightweight but strong metal alloy, which allows for a very thin and comfortable frame. It’s covered in a gum-colored resin or plastic with prosthetic (false) teeth precisely set at the missing teeth’s locations. The appliance stays in place through a series of clasps that attach to the remaining teeth.
Each RPD is custom-made to fit a patient’s mouth contours and the locations and patterns of the missing teeth. The top design goal for each individual RPD is to minimize any rocking movement during chewing; achieving that goal will depend not only on how many teeth are missing and where, but also what type of teeth are being replaced. For example, teeth missing from the back would require a different support design than teeth missing from the side or front.
RPDs’ biggest benefits are comfortable fit, effective dental function and good appearance. However, their means of attachment can create difficulties keeping remaining teeth clean of disease-causing bacterial plaque. Furthermore, an ill-fitting or unstable RPD could damage or even loosen natural teeth. It’s therefore essential for wearers to diligently practice daily hygiene (including cleaning the RPD) and undergo regular fit monitoring with their dentist.
Even with these constraints, a RPD can do an acceptable job providing dental function. What’s more, it can definitely improve your smile.
If you would like more information on options for dental restoration, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Removable Partial Dentures: Still a Viable Tooth-Replacement Alternative.”